The product is a bus system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.
It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
For automation functions, the detection sensitivity can be increased in the triggered system status.
A circular spacer (PLV-P-ST) has been developed as a certified accessory for ceiling mounted detectors so the bus cable can be hidden in cases where it cannot be neatly hidden in the ceiling.
Power supply | via the control panel bus 12 V (9 ... 15 V) |
---|---|
Backup (idle) mode current consumption | 2.8 mA |
Current consumption for cable selection | 30 mA |
Recommended installation height | 2.5 - 3.5 m above the floor level |
Detection angle/detection coverage | 360°/11 m (at a 3.5 m installation height) |
Dimensions | ∅125 x 40 mm |
Classification | EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 |
Environment according to | EN 50131-1 II. indoor, general |
Operation temperature range | -10 °C to +40 °C |
It also meets the requirements of | EN 50130-4 ed. 2+A1, EN 55032, EN 50581 |