Your shopping cart is empty!
Categories
JA-155P Wireless ceiling PIR motion detector
Price:
$0.00
Product Code: JA-155P
Availability: 999
Availability: 999
(JA-155P Wireless ceiling PIR motion detector
The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.
It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
The mounting spacer (PLV-P-ST) is a certified accessory for ceiling detectors; these can be used with wireless detectors to separate the antenna from the mounting surface and thus to potentially improve the range.
Technical data
| Power supply | Up to 2x CR123A (3 V/1500 mAh) |
|---|---|
| Service life | 1x CR123A 2 years/2x CR123A 4 years |
| Low battery voltage | <2.4 V |
| Communication frequency | 868.1 MHz |
| Communication range | approx. 300 m (free terrain) |
| Recommended installation height | 2.5 - 3.5 m above the floor level |
| Detection angle/detection coverage | 360°/11 m (at a 3.5 m installation height) |
| Dimensions | ⌀125 x 40 mm |
| Classification | Security level 2 (EN 2 50131-1) |
| Environment according to | EN 50131-1 II. indoor, general |
| Operation temperature range | -10 °C to +40 °C |
| It also meets the requirements of | EN 50131-2, EN 50131-5-3+A1, ETSI EN 300 220-1-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 |
Write a review
Your Name:
Your Review:
Note: HTML is not translated!Rating: Bad Good
Enter the code in the box below:
