JA-120PW Bus PIR / MW motion detector

Price: $0.00
Product Code:  JA-120PW
Availability:  999
0 reviews  (0 reviews)   |   Write a review

JA-120PW Bus PIR / MW motion detector

For Burglar Alarm and Security Installations & Home Automation

Jablotron Burglar Alarm Security System is work to : Schools, House, Villa, Mansion, Village houses, Apartment, Shopping Mall, Ground Level Shops, Upper Level Shops...

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.

Download Manuel - JA-120PW(88.68kb)

The detector guards the same way as a classic PIR motion detector.

When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.


Power supply control panel bus 12 V (9 ... 15 V)
Current consumption in standby mode 5 mA
Current consumption for cable choice 5 mA
Recommended installation height 2.5 m above floor level
PIR sensor detection angle/detection range 110 degrees / 12 m (with standard lens)
Operational temperature range -10 to +40 °C
Dimensions 95 x 60 x 55 mm
Complies with EN 50130-4, EN 55022

Write a review

Your Name:
Your Review:
Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Related Products